We are very pleased to offer the genuine Volkswagen Adaptive Cruise Control PR-6K3, 6K4 for Volkswagen.
This upgrade enables the radar sensor in the front bumper to control the speed and distance of the vehicle and follows the vehicle ahead automatically adjusting the vehicle speed as required. The system can operate upto approx 100mp/h. Set speed and distance via the multi-function steering wheel +/-. This upgrade increases driving comfort and safety especially in heavy traffic and motorway journeys.
The system displays the set distance and control range in the vehicles Driver Information Display.
This upgrade is suitable for the following models;
- Volkswagen T6 models 2016-2020 with PR-6K2 and Highline DIS PR-9Q5,9Q4.
- Volkswagen Caddy 2016-2020 with PR-6K2 and Highline DIS PR-9Q5,9Q4.
If your vehicle doesn't have a MFSW, please select this option below. Please note: The Mk8 MFSW upgrade is not compatible with the T6 ACC, however there is an aftermarket solution available for the Caddy.
- Stop and Go function is available on automatic vehicles only and will require a replacement ABS pump (optional). If the ABS pump is not replaced the ACC will cancel at approx 20mph.
- Installation takes approx 5 hours on models that don't require ABS pump.
Note: If the vehicle is automatic and you would like the Stop and Go function, installation will take 1-2 working days.
We will need the vehicle brought to our workshop in AL3 8JH for this installation.
*If your vehicle does't have PR-6K2 we will need to install the radar sensor and calibrate the system. If required please select this option below.
If you have any questions or would like to know more, feel free to contact us via telephone or email and one of our friendly staff will be happy to help.
